Konica Minolta CF5001 Service Manual page 492

JAM CODE LIST
Classifi- Jam
cation code
Paper J13-01
feed
tray /3
J13-11
C-208 J14-01
J14-11
Paper J17-01
feed
J17-02
J17-03
J17-04
Causes
After the pick-up solenoid /3 (SD9) is
turned ON, pre-registration sensor /3
(PS41) is not turned ON.
Pre-registration sensor /3 (PS41) was
turned ON in the idling condition.
After the paper feed solenoid (SD100)
is turned ON, paper feed sensor
(PS107) is not turned ON within speci-
fied time.
Feed sensor (PS106) was turned ON in
the idling condition.
After the loop roller motor (M31) is
turned ON, registration sensor (PS22)
is not turned ON within specified time.
After the ADU pre-registration clutch
(MC3) is turned ON, registration sensor
(PS22) is not turned ON within the
specified time.
After the pre-registration clutch /3
(MC12) is turned ON, vertical convey-
ance sensor (PS50) is not turned ON
within specified time.
After the pre-registration clutch /2
(MC10) is turned ON, vertical convey-
ance sensor (PS50) is not turned ON
within specified time.
CF5001 Field Service Ver.1.0 Sep 2003
Resulting
operation
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
—
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
—
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
Printer section
stops immedi-
ately.
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
5-2
Correction
Pull out the paper feed
tray /3 and remove
jammed paper, if any.
Open the LCT top
cover and remove
jammed paper, if any.
Pull out ADU and
remove jammed
paper, if any.
Open the vertical con-
veyance door and
remove jammed
paper, if any.
Pull out the paper feed
tray /2 and remove
jammed paper, if any.