Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
4. Remove 5 relay connectors [1].
5. Remove 10 screws [2] and then remove the fan
holder /R [3].
Note:
• Check the direction where the fan is assem-
bled.
[1] Turn the label side inside.
[2] Turn the label side outside.
6. Remove 2 screws [1] and then remove the write
pressing board [2] while pressing it downward.
7. Remove 2 screws [3] and then remove 2 write
cooling ducts [4].
Note:
• Be sure to hold the upper half of the write
pressing board when removing it.
[2]
[2]
[3]
[3]
[4]
[3]
1-25
WRITING
[2]
[1]
[2]
8050ma3030
[1]
[2]
5001ma3030
[1]
[2]
8050ma3031
Advertisement
Table of Contents
