Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
Step
3
In the ISW Trns main window, click
the [Board] field in [Select Type] and select
the name of the board on which to update
ROM from the pulldown menu.
4
In the ISW Trns main window, click
the [Divide] field in [Select Type] and select
a method of dividing the transfer files
(update data) from the pulldown menu.
Note:
• Normally, select ORIGINAL as the
method of division.
• Select DIVIDED for large ROM data (e.g.
for Main Control Unit), that is divided
into several files (extension .001.b01,
etc.) to be stored to several floppy
disks for distribution.
Procedure
in
CF5001
USA
in
CF5001
USA
C1/C4(ALL)
ORIGINAL
DIVIDED
2.4.6
Selecting a version of transfer files
(update data)
When a transfer file (update data) has been
chosen to meet a given set of conditions, it may
be available in multiple versions. Here, select a
particular version of a transfer file (update data)
for use in the actual data transfer.
Step
1
[ISW Trns main window]
In the ISW Trns main window, select a
transfer file (update data) of the version
that is used in the actual data transfer from
among the files listed in the [File] field in
[Version].
50img_dc0001
2003/ 8/15
CF5001
Note:
• The version of a transfer file (update
data) can be determined from its file
name.
Example:
50img_DC001AAA.b01 .. Version 1
50img_DC002AAA.b01 .. Version 2
2
The target file (update data) may not be
shown in the [File] field in [Version], if it
exists in a folder different from the data
folders set in the Option screen. Click
Browse and find the appropriate file to
select.
CF5001
Di850
Note:
• Clicking Browse will open the Select
File window.
3-17
UPDATING WITH ISW Trns
Procedure
CF5001
50img_dc000.b01
50img_dc0001.b01
50img_dc0001.b00
Advertisement
Table of Contents
