Table of Contents
Advertisement
36 MODE
(2) Printer registration loop adjustment
Adjust the paper loop amount in the registration
roller section to remove paper skew and wrinkle, or
paper jamming in the registration section.
This adjustment can be shown in the key operator
mode by setting the DIPSW12-1 to 1.
a.
Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [2. Image adjustment] key.
3. "Image adjustment menu screen"
Press the [2. Timing adjustment] key.
4. "Timing adjustment mode menu screen"
Press the [2. Printer registration loop adj.] key.
5. "Printer registration loop adjustment screen
(Tray 1)"
For the printer registration loop adjustment, the
following items are provided. Press the [NEXT
ADJUSTMENT] key or [PREVIOUS ADJUST-
MENT] key to select an item you want to
adjust.
• "Printer registration loop adjustment (Tray 1 L)"
• "Printer registration loop adjustment (Tray 1 S)"
• "Printer registration loop adjustment (Tray 2 L)"
• "Printer registration loop adjustment (Tray 2 S)"
• "Printer registration loop adjustment (Tray 3 L)"
• "Printer registration loop adjustment (Tray 3 S)"
• "Printer registration loop adjustment
(Bypass L)"
• "Printer registration loop adjustment
(Bypass S)"
• "Printer registration loop adjustment (Tray 4 L)"
• "Printer registration loop adjustment (Tray 4 S)"
• "Printer registration loop adjustment (ADU L)"
• "Printer registration loop adjustment (ADU S)"
• "Printer registration loop adjustment (Thick)"
Note:
• Large size: 300 mm or more in length in the
paper feed direction
• Small size: 300 mm or less in length in the
paper feed direction
• Thick Paper: 106 g/m
2
or more
2-68
CF5001 Field Service Ver.1.0 Sep 2003
6. Enter a numeric value through the numeric
keys and press the [SET] key.
7. Press the [COPY SCREEN] key.
8. Set the copy according to the item that has
been adjusted and press the START button to
output a test pattern (No. 16).
9. If the printer registration loop amount is not
appropriate, press the C button while pressing
the P button.
10. "Printer registration loop adj. screen"
Enter a numeric value through the numeric
keys and press the [SET] key.
• Setting range: -99 to +99, 1 step = 0.1 mm
11. Repeat steps 6 to 10 until the standard value is
obtained.
12. Press the [PREVIOUS SCREEN] key to return
to the "Timing adjustment mode menu screen."
Advertisement
Table of Contents
