Table of Contents
Advertisement
JAM CODE LIST
Classifi-
Jam
cation
code
AFR-20 J62-07
J65-01
J65-02
J65-03
J65-04
Others
J71-01
FN-120
FN-9
Others
J71-02
TMG-3
FN-120
J72-16
FN-9
J72-17
J72-18
Causes
After the paper exit sensor (PS306) is
turned ON, it is not turned OFF within
the specified time.
Registration sensor (PS301) is ON in
the idling condition.
Reverse sensor (PS305) is ON in the
idling condition.
Timing sensor (PS302) is ON in the
idling condition.
Paper exit sensor (PS306) is ON in the
idling condition.
FNS front door open jam. FNS interlock
switch (MS701) was turned OFF when
copying/printing.
TU front door open jam. Front door
MS2 (MS2) was turned OFF when
copying/printing.
After the paper exit sensor (PS13) is
turned ON, FNS inlet sensor (PS704) is
not turned ON within the specified time.
After the FNS inlet sensor (PS704) is
turned ON, main tray paper exit sensor
(PS706) is not turned ON within the
specified time.
After the FNS inlet sensor (PS704) is
turned ON, stacker inlet sensor
(PS705) is not turned ON within the
specified time (when stapling).
CF5001 Field Service Ver.1.0 Sep 2003
Resulting
operation
RADF stops
immediately.
If there is paper
in or after trans-
fer process,
main body stops
after paper exit.
—
Printer section
stops immedi-
ately.
FNS/main body
stop immedi-
ately.
5-6
Correction
Open the paper exit
section cover and
remove jammed
paper, if any.
Remove jammed
paper in the main
body conveyance sec-
tion, if any.
Open the paper feed
section cover and
remove jammed
paper, if any.
Open the paper exit
section cover and
remove jammed
paper, if any.
Open the paper feed
section cover and
remove jammed
paper, if any.
Open the paper exit
section cover and
remove jammed
paper, if any.
Close the FNS front
door.
Close the TU front
door.
Remove jammed
paper in the FNS/main
body, if any.
Advertisement
Table of Contents
