Running Test Mode; Test Pattern Output Mode - Konica Minolta 7155 Service Manual

[16] Running Test Mode

Testing continuous copy operation.
Select " Running test mode" in the Adjustment
3
mode menu Screen.
This adjustment consists of the following items:
Intermittent copy mode
1
In this mode, the machine goes into the copy
ready state after completing a set number of
copy operations, waits 0.5 sec, and then repeats
the same operation.
Paperless running mode
2
In this mode, the machine goes into the copy
ready state after completing a set number of
copy operations without performing paper detec-
tion or jam detection, waits 0.5 sec, and then
repeats the same operation.
Paperless mode
3
In this mode, the machine makes a set number
of copies at approximately the same timing as for
normal copy without performing paper detection
or jam detection.
Paperless endless mode
4
In this mode, the machine makes copies at
approximately the same timing as for normal
copy without performing paper detection or jam
detection. The copy quantity is set to infinity
automatically.
Running mode
5
This mode consists of Paperless mode with
repetitive scanner scan and auto paper feed tray
change.
Step
Enter the 36 mode.
1
[Adjustment mode menu Screen]
2
Press " Running test mode".
3
[Running test mode menu Screen]
3
Press mode keys
[Copy Screen]
4
Press the START button.
Check the copy operation and then
5
press the STOP button to stop.
Turn the SW2 (sub power) OFF.
6
Operation
to .
1 5

[17] Test pattern output mode

Output test pattern.
Select " Test pattern output mode" in the Adjust-
4
ment mode menu Screen to display the Test pattern
output mode screen.
Caution: Do not touch any mode that is not spe-
cifically described.
Step
Enter the 36 mode.
1
[Adjustment mode menu Screen]
2
Press "
[Test pattern output mode Screen]
Use the numeric keys to enter the num-
3
ber of the test pattern to output and press
the
SET
Press the
4
[Copy Screen]
Select 11x17 size paper and press the
5
START button to output the test pattern.
To output another test pattern, press the
C button while pressing the P button and
6
repeat steps 3 to 5.
7 Press the
1-71
36 MODE
Operation
Test pattern output mode".
4
key.
key.
COPY SCREEN
key to end.
RETURN