Table of Contents
Advertisement
PROCESS UNIT
4.7
Replacing the belt cleaning
blade
A. Periodically replaced parts/cycle
• Belt cleaning blade: Every 100,000 copies
B. Procedure
1. Remove the belt cleaning unit. (See "4.6
Replacing the belt cleaning unit.")
2. Remove 2 blade springs [1].
3. After removing the stop ring [2], pull out the
blade support shaft [3] and remove the belt
cleaning blade [4].
4. Reinstall the above parts following the removal
steps in reverse.
Note:
• Before installing the belt cleaning unit, coat
the entire surface on the side on the transfer
belt, on which the belt cleaning unit is to be
mounted, with the setting powder.
CF5001 Field Service Ver.1.0 Sep 2003
[2]
1-36
[4]
[3]
[3]
[1]
8050ma3049
Advertisement
Table of Contents
