Konica Minolta CF5001 Service Manual page 181

C-208 Ver.1.0 Sep 2003
12. Remove the E-ring [1] and then remove the
drive pulley [3] while releasing the winding of the
up/down wire /A [2].
13. Remove the up/down wire /A [2] from the up/
down drive shaft [4].
14. Remove the up/down wire /A [2] from the guide
pulleys [5], [6] and [7].
Note:
• When removing the up/down wire /A [2]
installed onto the guide pulleys [5], [6] and [7],
be sure to pull out the wire from a notch [8]
provided on the side of each pulley to move
the wire cover [9] of each pulley to the loca-
tion where the notch [8] can be avoided.
15. Remove a screw [10] and then remove the up/
down wire protective cover [11].
16. Pull out the up/down wire /A [2] from the upper
surface [12] of the LCT main body to remove it.
[11]
[10]
[12]
[6]
[7]
[5]
[9]
[2]
[8]
1-151
TRAY UP/DOWN
[9]
[8]
[2]
[2]
[4]
[2]
[3]
[3]
[2]
[4]
[1]
lt2113034