Lct Paper Feed Roller Pressure Adjustment - Konica Minolta CF5001 Service Manual

CF5001 Field Service Ver.1.0 Sep 2003
9.23 LCT paper feed roller pres-
sure adjustment
Perform the LCT paper feed roller pressure adjust-
ment when the no feed jam occurs at the paper
feed.
Note:
• The weight plate is a supply part. It should be
purchased separately.
A. Procedure
1. Open the top cover [1].
2. Remove the spring [2].
3. Install the weight plate [4] on the paper feed
roller [3] with 2 screws [5].
4. Replace the spring [2].
5. Close the top cover.
6. Perform the continuous copy to check the paper
feed.
7. Repeat steps 1 to 6 if the no feed jam continues
to occur at the paper feed.
[5]
[3]
2-171
OTHER ADJUSTMENTS
[4]
[2]
[1]
8050fs1068