Table of Contents
Advertisement
C-208 Ver.1.0 Sep 2003
D. Reinstalling the rear drive
Note:
• Reinstall the rear drive following the removal
steps in reverse, but be sure to make position-
ing adjustments of the remaining paper detec-
tion gear at "C. Removing the up/down drive."
1. Conduct in reverse the steps 10 to 6 of "C.
Removing the up/down drive."
2. With the up/down plate at its lower most posi-
tion, stop the actuator of the remaining paper
detection gear [1] at the position where it
detects the remaining paper sensor /4 (PS105)
[2] and install the gear [3].
3. Conduct in reverse the steps 1 of "C. Removing
the up/down drive."
[3]
1-149
TRAY UP/DOWN
[2]
[2]
[1]
lt2113030
lt2113031
Advertisement
Table of Contents
