Copying Transfer Data (Update Data) - Konica Minolta CF5001 Service Manual

UPDATING WITH ISW Trns
2.2 Copying
(Update Data)
Run the ISW Trns program to copy transfer
data (update data) to the PC.
Step
1 Boot the PC.
2 Select ISW Trns from the Start menu to
run the ISW Trns program.
3 Click the Option menu.
4 [Option window]
Click Data Copy.
5 [File Copy window]
Mount an update disk on the PC and click
Browse.
6 Select the folder on drive A that contains
the transfer file (update data) as a source
file.
Note:
• The selected folder is displayed in the
upper section in the Original Files field.
• The transfer files (update data) that are
stored in the selected folder are dis-
played in the lower section in the Origi-
nal Files field.
7 Select the transfer files (update data) you
want copied from the lower section in the
Original Files field.
Note:
• You can select multiple transfer files
(update data).
• To copy all the files (update data) dis-
played, skip this step to go to Step 8
directly.
Transfer Data
Procedure
CF5001 Field Service Ver.1.0 Sep 2003
8 Click Copy to copy the selected transfer
files (update data) to the folder created at
ISW Trns setup.
Note:
• To copy all the files (update data) dis-
played in the Original Files field, click
Copy All, instead of Copy.
• The folder name created at ISW Trns
setup is displayed above the Copied
File field.
• The transfer files that have been copied
successfully so far are listed in full-
path name in the lower part of the Cop-
ied File list view.
The transfer files that have not been
copied successfully are listed in the
Failed to Copy Files list view.
Causes of copy errors:
1. A file with the same name existed and
the O/W (overwrite) check box was not
checked.
2. The storage destination folder could
not be found.
3. Attempted to overwrite an overwrite
protected file.
• To update existing transfer files (update
data), check the O/W (overwrite) check
box.
9 When the copying completes, click
Refresh.
10 If more update disks are involved, repeat
Steps 5 to 9.
11 Click Cancel to return to the option win-
dow.
12 [Option window]
Click OK.
3-14