Table of Contents
Advertisement
EXTERIOR
1.4
Angle
adjustment
operation board
Note:
• The operation board can be set at the two
steps of 7 and 18 degrees depending on the
front cover /2 provided or not provided.
When the front cover /2 provided: 7 degrees
When the front cover /2 not provided: 18
degrees
A. Procedure
1. Open the front door [1] and the toner supply
door [2].
2. Remove 2 screws [3] and release the fixing of
the operation board [4].
3. With the operation board raised up, remove the
front cover /2 [5] (when the angle is changed
from 7 to 18 degrees).
4. Fasten the operation board [4] with 2 screws [3].
5. Close the front door [1] and the toner supply
door [2].
Note:
• When changing the angle of the operation
board from 18 to 7 degrees, install the front
cover /2 by following Step 3.
of
the
[1]
1-6
CF5001 Field Service Ver.1.0 Sep 2003
[3]
[4]
[5]
[3]
[2]
8050ma3009
Advertisement
Table of Contents
