Table of Contents
Advertisement
C-208 Ver.1.0 Sep 2003
2. Remove an E-ring [1].
3. Remove 5 screws [2].
4. Remove 2 bearing [3] and then remove the
guide plate [4].
5. Remove the gear [1].
Note:
• When reinstalling this gear, be sure to make
the positioning adjustments of the remaining
paper detection gear at this step. For posi-
tioning adjustments, see "D. Reinstalling the
rear drive."
6. Remove an E-ring [2] and a pin [3] and then
remove the gear [4].
7. Remove an E-ring [1], and then remove a bear-
ing [2], the gear [3] and a bearing [4].
8. Remove an E-ring [5] and then remove the gear
[6] and a pin [7].
[1]
[1]
[4]
[7]
[5]
1-147
TRAY UP/DOWN
[2]
[2] [3]
[4]
lt2113024
[3]
[2]
lt2113025
[3]
[4]
[1]
[6]
[2]
lt2113026
Advertisement
Table of Contents
