Table of Contents
Advertisement
UPDATING WITH ISW Trns
2.4.2
Checking the ROM version of the copier
(before updating)
Before updating ROM data, check the ROM
version of the existing control program in the 25
mode.
Step
1
Turn OFF the copier main switch.
2
Turn ON the copier main switch while hold-
ing down the copy count setup buttons 2
and 5, to enable 25 mode.
3
[25 mode menu window]
Check the ROM version by following the
copier-specific procedure.
Note:
• For operating instructions, refer to the
Adjustment section of the service man-
ual supplied for the copier.
2.4.3
Preparing the copier to transfer.
Start the copier with 25 mode enabled to put
the copier into ISW transfer wait state.
Step
1
Turn OFF the copier main switch.
2
Turn ON the copier main switch while hold-
ing down the copy count setup buttons 2
and 5, to enable 25 mode.
3
[25 mode menu window]
Put the copier into ISW transfer wait state
by following the copier-specific procedure.
Note:
•" ISW transfer wait state" is the state of
the copier with the "START" key being
shown in the display area.
• For operating instructions, refer to the
Adjustment section of the service man-
ual supplied for the copier.
2.4.4
Running ISW Trns.
Run the ISW Trns program.
Step
1
Boot the PC.
2
Select ISW Trns from the Start menu and
run the ISW Trns program.
Procedure
Procedure
Procedure
CF5001 Field Service Ver.1.0 Sep 2003
2.4.5
Selecting transfer file (update data)
conditions
Select various conditions for selecting the
transfer files (update data) in the ISW Trns
main window. Conditions to select are:
• (Machine) The name of the model on which
ROM data is updated.
• (Country) The destination of the transfer files
(update data)
• (Board) The name of the board on which ROM
data is updated
• (Divide) The type of the transfer files (update
data)
Step
1
[ISW Trns main window]
In the ISW Trns main window, click
the [Machine] field in [Select Type] and
select the name of the model on which to
update ROM data from the pulldown
menu.
2
In the ISW Trns main window, click
the [Country] field in [Select Type] and
select the destination of the transfer files
(update data) from the pulldown menu.
3-16
Procedure
in
CF5001
in
CF5001
Euro
Japan
USA
Advertisement
Table of Contents
