Figure 2 Remove the Duplex Unit Timing Belt
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
REP 10.32 Exit Drive Assembly
Parts List on
PL 10.30 Item 23
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the IP Board Cover,
3.
Remove the Right Cover,
REP
4.
Remove the Waste Toner Cartridge.
5.
Remove the Left Cover,
REP
6.
Remove the IP Board Cage,
7.
Remove the Top Cover,
REP
8.
Remove 5 screws (2 plastic, 3 metal) that secure the rear support bracket to the chassis.
9.
Lift the bracket and rest on the printer chassis,
Figure 1 Remove the rear support bracket
5/2011
4-115
WARNING
10.1.
REP
28.1.
28.2.
28.3.
REP
3.5.
28.5.
Figure
1.
REP 10.19, REP 10.32
Repairs