REP 3.5 IP Board Cage
Parts List on
PL 3.10 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove Tray 2.
2.
Remove the Duplex Unit,
REP
10.1.
3.
Remove the IP Board Cover,
REP
4.
Remove the Right Cover,
REP
28.2.
5.
Disconnect 5 connections (CN8, CN10, CN12, CN13, and CN14) to the IP Board and
feed the harnesses out the holes provided,
Repairs
REP 3.5
WARNING
28.1.
Figure
1.
Figure 1 Disconnect the IP Board
6.
Remove 2 screws (metal) and slide the IP Cage to the rear to release 2 hooks that secure
the cage to the chassis,
Figure
5/2011
4-16
2.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual