Rep 4.3 Paper Transportation; Rep 4.3.1 Fuser Exit Assembly - Xerox DocuPrint P1202 Service Manual

REP 4.3 Paper Transportation

REP 4.3.1 Fuser Exit Assembly

Removal
1 Disconnect the AC power cord and remove the Paper Tray.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel.
6 Remove the Main Cover (REP 4.1.3).
7 Remove the Fuser Cover (Figure 4.3.1a).
Repair Procedures
Figure 4.3.1a Exit Assembly Removal.
3/99
www.printcopy.info
4-14
egl_331a
Xerox DocuPrint P1202 Service Manual