Figure 2 Remove the shaft from the bracket
Repairs
REP 12.9, REP 12.10
REP 12.10 Left Tamper Home Position Sensor
Parts List on
PL 12.35 Item 10
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Separate the Finisher from the printer,
2.
Remove the Left Cover,
REP
3.
Release the hook and disconnect P/J118 to remove the sensor.,
Figure 1 Remove the Left Tamper Home Position Sensor
5/2011
4-136
WARNING
GP
14.
12.1.
Figure
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
1.