Rep 10.12 Fuser Thermostat - Xerox Phaser 4620 Service Manual

Figure 2 Remove the Thermistor
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual

REP 10.12 Fuser Thermostat

Parts List on PL 10.15 Item 4
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Do not touch the Fuser while it is hot.
Fuser plastic is easily over stressed or broken. Use care when releasing hooks that secure
Fuser covers and guides.
Two small bushings (washers) are located under the Thermostat. Use care removing the Ther-
mostat.
1. Remove the Rear Door, REP
2. Remove the Fuser, REP 10.10.
3. Remove 3 screws (2 metal) and (1 plastic) that secure the Fuser top cover,
Figure 1 Remove the Fuser top cover
5/2011
4-97
WARNING
WARNING
CAUTION
CAUTION
28.6.
REP 10.11, REP 10.12
Figure 1.
Repairs