Rep 8.48 Hcf Lift Limit Switch; Rep 8.49 Hcf Take Away Sensor - Xerox Phaser 4620 Service Manual

REP 8.48 HCF Lift Limit Switch

Parts List on PL 8.25 Item 14
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove any installed finishing options from the IOT,
2. Separate the HCF feeder from the printer,
3. Remove the HCF rear cover, REP
4. Remove the HCF right cover, REP
5. Remove the HCF left cover, REP 7.40.
6. Remove the HCF top plate, REP 7.49.
7. Disconnect P/J93 and release 2 hooks that secure the switch to the HCF Feed Assembly,
Figure 1.
Figure 1 Remove the Lift Limit Switch
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
GP 15. The module
WARNING
GP 14.
GP 15.
7.38.
7.39.

REP 8.49 HCF Take Away Sensor

Parts List on PL 8.25 Item 2
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove any installed finishing options from the IOT,
2. Separate the HCF feeder from the printer,
3. Remove the HCF rear cover,
4. Remove the HCF right cover,
5. Remove the HCF left cover, REP
6. Remove the HCF top plate, REP
7. Remove the HCF Feed Assembly,
8. Disconnect P/J95 and release 2 hooks that secure the sensor to the HCF Feed Assembly,
Figure 1.
Figure 1 Remove the HCF Take Away Sensor
5/2011
4-77
WARNING
GP
WARNING
GP 14.
GP 15.
REP 7.38.
REP 7.39.
7.40.
7.49.
REP 8.47.
REP 8.48, REP 8.49
15. The module
Repairs