Rep 10.14 Fuser Gear - Xerox Phaser 4620 Service Manual

9. Remove 2 screws (Silver, metal) that secure the Fuser left cover,
Figure 7 Remove the Fuser left cover
10. Disconnect the Heat Lamp from the 2 terminals (T3, T4) and remove,
Figure 8 Remove the Heat Lamp
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
Figure 7.

REP 10.14 Fuser Gear

Parts List on
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Do not touch the Fuser while it is hot.
Fuser plastic is easily over stressed or broken. Use care when releasing hooks that secure
Fuser covers and guides.
1. Remove the Rear Door,
2. Remove the Fuser,
3. Remove 3 screws (2 metal) and (1 plastic) that secure the Fuser top cover,
Figure 8.
4. Remove 3 screws (Black, plastic) that secure the duplex cover to the Fuser,
5/2011
4-101
PL 10.11 Item 14
WARNING
WARNING
CAUTION
REP 28.6.
REP 10.10.
Figure 1 Remove the Fuser top cover
Figure 1.
Figure 2.
Repairs
REP 10.13, REP 10.14