Rep 7.3 Tray 1 Pick-Up Assembly - Xerox Phaser 4620 Service Manual

Figure 3 Feeder Assembly wire routing
Repairs
REP 7.0, REP 7.3

REP 7.3 Tray 1 Pick-up Assembly

Parts List on PL 8.10 Item 3
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cover the Drum Cartridge to prevent light exposure.
1. Remove Tray 2.
2. Open the Top Door.
3. Remove the Toner Cartridge.
4. Remove the Drum Cartridge.
5. Remove the Duplex Unit, REP
6. Remove the IP Board Cover,
7. Remove the Right Cover, REP
8. Remove the Front Cover, REP
9. Remove the Tray 1 Feeder Assembly,
10. Remove the Tray 1 Feed Clutch,
11. Remove 4 screws (plastic) that secure the top of the Feeder Assembly,
5/2011
4-26
WARNING
CAUTION
10.1.
REP 28.1.
28.2.
28.4.
REP 7.0.
REP 7.16.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
Figure 1.