REP 28.1 IP Board Cover
Parts List on
PL 28.10 Item 6
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Slide the cover to the rear to release the hooks that secure the cover,
Figure 1 Remove the IP Board Cover
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
Figure
1.
REP 28.2 Right Cover
Parts List on
PL 28.10 Item 4
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the IP Board Cover,
3.
Remove 2 screws (metal) that secure the cover to the chassis.
4.
Slide the cover to the rear to release 6 hooks to remove the cover,
Figure 1 Remove the Right Cover
5/2011
4-147
WARNING
10.1.
REP
28.1.
Figure
REP 28.1, REP 28.2
1.
Repairs