Rep 10.6 Exit Assembly - Xerox Phaser 4620 Service Manual

REP 10.6 Exit Assembly

Parts List on PL 10.30 Item 25
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the IP Board Cover, REP
3. Remove the Right Cover, REP 28.2.
4. Remove the Waste Toner Cartridge.
5. Remove the Left Cover, REP 28.3.
6. Remove the IP Board Cage, REP 3.5.
7. Remove the Top Cover, REP 28.5.
8. Remove 2 screws that secure the Upper Option Connector to the chassis,
Figure 1 Remove the Upper Option Connector screws
9. Remove 5 screws (2 plastic, 3 metal) that secure the rear support bracket to the chassis.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
28.1.
Figure
10. Lift the bracket and rest on the printer chassis,
1.
Figure 2 Remove the rear support bracket
11. Disconnect CN3 and CN4 from the Joint Board and feed into the chassis.
12. Remove 4 screws (metal) that secure the Joint Board to the chassis,
5/2011
4-87
Figure 2.
Figure 3.
Repairs
REP 10.6