Rep 12.6 Finisher Exit Gate Sensor - Xerox Phaser 4620 Service Manual

Figure 4 Remove the Transport Drive Assembly
Repairs
REP 12.5, REP 12.6

REP 12.6 Finisher Exit Gate Sensor

Parts List on PL 12.40 Item 18
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the left cover, REP 12.1.
3. Disconnect P/J116 and release 3 hooks that secure the sensor to the bracket,
Figure 1 Remove the Exit Gate Sensor
5/2011
4-132
WARNING
GP 14.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
Figure 1.