Figure 3 Remove the Level Sensor
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
REP 7.38 HCF Rear Cover
Parts List on
PL 7.20 Item 2
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Cover removal is possible without removing the feeder from the printer.
1.
Remove 2 screws (metal) that secure the rear cover to the chassis,
Figure 1 Remove the rear cover
5/2011
4-53
WARNING
Figure
1.
REP 7.37, REP 7.38
Repairs