Rep 9.3 Waste Toner Cartridge Detect Sensor - Xerox Phaser 4620 Service Manual

Figure 2 Remove the ADC Sensor holder screws
6. Remove 1 screw and loosen 1 screw, then disconnect P/J65 to remove the ADC Sensor
from the holder, Figure 3.
Figure 3 Remove the ADC Sensor from the holder
Repairs
REP 9.2, REP 9.3

REP 9.3 Waste Toner Cartridge Detect Sensor

Parts List on PL 9.15 Item 6
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP
4. Release 3 hooks that secure the sensor to the bias cover.
5. Disconnect P/J30 to remove the sensor,
Figure 1 Remove the Waste Toner Cartridge Detect Sensor
5/2011
4-80
WARNING
10.1.
28.3.
Figure 1.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual