Paper Empty In Tray 1 Rap - Xerox Phaser 4620 Service Manual

2. Pick Assembly, PL 8.20 Item 17
Status Indicator RAPS
07-430-00, 07-431-00, 07-500-00

07-500-00 Paper Empty in Tray 1 RAP

07-500-00 The Tray 1 No Paper Sensor indicates Tray 1 is empty.
BSD-Reference: WD 5
Initial Actions
1. Add media to the Tray.
2. Check the No Paper Sensor Actuator.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Tray 1 No Paper Sensor Actuator. The actuator is undamaged and motion is
good.
Y N
Repair or replace the Tray 1 No Paper Sensor Actuator.
Select dC330 code 07-110 to test the sensor. The sensor signal changes (high/low).
Y N
Replace the Tray 1 No Paper Sensor
changes.
Y N
Remove the Right Cover
retest. The sensor signal changes.
Y N
Replace the MCU Board,
Reassemble and perform
Reassemble and perform SCP 6
Replace the MCU Board, REP 3.4.
5/2011
2-30
WARNING
(REP 7.15), then retest. The sensor
(REP 28.2) and reseat CN13 on the MCU Board, then
REP 3.4.
SCP 6 Final Actions.
Final Actions.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
signal