Pl 8.25 Hcf Pick-Up Assembly - Xerox Phaser 4620 Service Manual

PL 8.25 HCF Pick-up Assembly

Item Part Description
1 – Feed roll frame (P/O PL 8.25 Item
16)
2 130N01628 No paper sensor (A)(REP 8.50)/
Feed sensor (B)(REP 8.51) (see
NOTE)
3 – No paper sensor actuator (P/O PL
8.25 Item 16) (REP 7.36)
4 022N02232 Feed roller
5 – Idle gear (P/O PL 8.25 Item 16)
6 – One way gear (P/O PL 8.25 Item
16)
7 – Bearing (P/O PL 8.25 Item 16)
8 – Feed roll shaft (P/O PL 8.25 Item
16)
9 – Static eliminator (P/O PL 8.25 Item
16)
10 – Ground strip (P/O PL 8.25 Item 16)
11 – Feed joint gear (P/O PL 8.25 Item
16)
12 – Idle gear (P/O PL 8.25 Item 16)
13 – Housing (P/O PL 8.25 Item 16)
14 – Tray up limit switch (P/O PL 8.25
Item 16) (see NOTE)
15 – Bearing (P/O PL 8.25 Item 16)
16 – Feed assembly (REP 8.47)
NOTE: The component control codes are dependent on the
machine configuration.
Parts Lists
PL 8.25
5/2011
5-16
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual