dC132 NVM Reset
Purpose
To reset NVRAM to factory defaults.
1.
Enter diagnostics, refer to
GP
1.
2.
Select Printer Routines, the DC132 NVRAM Initialization.
3.
Confirm, Yes, to reset NVRAM to factory defaults.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
dC305 UI Test
Purpose
To test Control panel display function.
1.
Enter diagnostics, refer to
GP
2.
Select Printer Routines, the DC305 NVRAM Initialization.
3.
Select from LDCD test or a complete UI test.
The display turns black as data is written to the display buffer. For the complete test, following
the LCD test, the test continues prompting for each Control Panel button.
5/2011
6-29
1.
General Procedures/Information
dC132, dC305