Xerox Phaser 4620 Service Manual page 153

Figure 1 Remove the rear support bracket
11. Remove the Front Cover, REP 28.4.
12. Remove the Rear Door, REP 28.6.
13. Remove the Fuser, REP 10.10.
14. Remove the MCU Board and bracket,
15. Remove the Tray 2 Feed Clutch, REP
16. Remove the Registration Clutch, REP
17. Remove the Feed Drive Assembly,
18. Remove 4 screws (metal) that secure the front support bracket,
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
REP 3.4.
4.2.
4.3.
REP 4.4.
Figure 2.
Figure 2 Remove the front support bracket
19. Remove 3 (plastic) screws, disconnect the Duplex Unit Detect Sensor P/J24, depress 1
tab and slide the guide to the rear to release the hooks and remove the left upper tray
guide from the chassis, Figure
5/2011
4-31
3.
Repairs
REP 7.6