Rep 9.3 Waste Toner Cartridge Detect Sensor; Rep 9.4 Left Side Chassis Fan - Xerox Phaser 4600 Service Manual

REP 9.3 Waste Toner Cartridge Detect Sensor

Parts List on PL 9.15 Item 6
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Release 3 hooks that secure the sensor to the bias cover.
5. Disconnect P/J30 to remove the sensor,
Figure 1 Remove the Waste Toner Cartridge Detect Sensor
Revised
Phaser 4600/4620/4622 Printer Service Manual
WARNING
Figure 1.

REP 9.4 Left Side Chassis Fan

Parts List on PL 9.15 Item 3
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP
4. Release 1 screw that secures the fan to the duct.
5. Disconnect P/J33 to remove the fan,
Figure 1 Remove the Left Side Chassis Fan
04/2016
4-83
WARNING
10.1.
28.3.
Figure 1.
4 Repairs and Adjustments
REP 9.3, REP 9.4