List Of Program Files - Furuno FS-1575 Service Manual

8.1.2 List of Program files

The files listed in the table below are saved in the program folder.
File Name Size (Ref.)
FSXX75.BIN 6,847 kB
IDCODE.SYS 1 kB
nLD_FS.bin 26 kB
nUP_FSXX75.bat 1 kB
nwuppg.exe 96 kB
The following diagram shows the configuration of CPUs and memories of the FS-xx75
system.
SUB CPU
(7) 78K FLASH
(4) CPU: 78K
MOT board
(8) CPLD
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Type
BIN File
System File
BIN File
MS-DOS Bat
File
Application File
T-CPU board
(6) FLASH
(1) CPU: SH-2A
FPGA
(5) FPGA
(3) DSP: c5502
(2) CPU: Nios2
Fig. 8.1.1 CPU and Memory Configuration
8-2
8.1 FS-xx75 Updating Program
Table 8.1.1 List of Files
Remark
Application data.
Program used to prevent data transfer to
other equipment.
Loader program used for the FS-xx75
system to receive and write data.
Batch file used to update programs.
Loader program used for a PC to transfer
data to the FS-xx75 system.
FS-xx75T
High Speed
Serial transmission
FS-2575C
C-CPU board
(11) FLASH
(10) CPU: SH-2A
(9) FPGA