Position] - Furuno FS-1575 Service Manual

4.3.4 [4. POSITION]

This Sub-menu 1 is used to make setting of positional data input method. Positional data
are displayed on the RT window and the SCAN window and also used for the
following:
1) DISTRESS MESSAGE
2) INDIVIDUAL MESSAGE (addressed to Coast)
3) RELAY INDIVIDUAL MESSAGE
4) PSTN MESSAGE
5) ACK BQ (Acknowledgement back) MESSAGE for POSITION CALL
6) Reception and responses to AREA MESSAGE
7) Reception and responses to RELAY AREA MESSAGE, and
8) Calculation of distance to Distress ship
Reference)
Data handling varies with the setting of Sub-menu 2: "FORMAT" in [MENU] ->
9.SERVICE -> 3.RT SETUP -> 1.SETUP -> "FORMAT."
• IEC+NMEA:
• IEC:
Sentences Used in Positional Data
1) There is no priority condition between Manual and EPFS modes. Manually switch
between these modes.
2) Sentence formatters for positional data: GNS, GGA, RMC, and GLL are accepted
in order of priority presented.
Talkers: GN, GP, GA, GL, LC, DE, LA, TR, IN, RA, WI, and II are accepted in
order of priority presented.
However, GNS sentences from any talker other than GP, GL, GN, and GA are not
received.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Accepts sentences compliant with NMEA Ver. 1.5, 2.0., or
3.0 or IEC-61162-1 ed4.0 even if they have no check sum
contained in them.
Accepts sentence compliant with NMEA-Ver. 3.0 or
IEC-61162-1 ed-4.0.
4-16
4.3 SYSTEM