Registering A Dsc Message [5]: Entry - Furuno FS-1575 Service Manual

1. Registering a DSC message
Procedure)
1. Select [MENU] -> 6.DSC -> 2.MSG FILE, and then press the [ENTER] knob.
The "MESSAGE FILE" window will appear. Press the [5]: ENTRY key, and the
"MESSAGE FILE ENTRY" will appear.
2. Click on "MSG TYPE," and then press the [ENTER] knob. Subsequently, select a
message type on the DSC MSG TYPE selection window, and then press the
[ENTER] knob.
3. Data corresponding to the message type are to be selected and entered.
To enter data in the "TO" and "FREQ" columns, data registered with the sub-menus
ADDRESS BOOK and USER CH can be used.
4. A <REGISTER> icon will appear and the cursor will move to this icon. Then, press
the [ENTER] knob. With this, the registration of a single MESSAGE FILE is
completed.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
[5]: ENTRY
4-34
4.4 DSC