Mmsi Setting And Clear All; Mmsi Setting - Furuno FS-1575 Service Manual

4.1 MMSI Setting and CLEAR ALL

4.1.1 MMSI Setting

Procedure)
1. Press and hold [S1]: MMSI switch on the T-IF board for a period of four seconds or
more. The "MMSI SETUP" window will appear.
FS-1575T
FS-2575T
MMSI SETUP
window
2. Enter the password: XXXXXX. Unless the password is accepted, no submenu can be
opened.
3. Click on "MMSI," and then press the [ENTER] knob. The MMSI entry box window
will appear. Enter MMSI on this window, and then press the [ENTER] knob.
When MMSI is already registered, overwrite the MMSI. To exit this window, press
the [CANCEL] key.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
FS-5075T
4-3
4.1 MMSI Setting and CLEAR ALL
T-IF: [S1]
Lock
Unlock