Rx Fil Board: 05P0862A, 05P0862B (Fs-5075, -2575/-1575); Mot Board: 05P0860 (Fs-5075, -2575, -1575); T-Cpu Board: 05P0859 (Fs-5075, -2575, -1575) - Furuno FS-1575 Service Manual

Ssb radiotelephone

Hide thumbs Also See for FS-1575:

Table of Contents

10. RX FIL board: 05P0862A, 05P0862B (FS-5075, -2575/-1575)

No setting is required.

No setting is required.

When a combination of programs installed to the T-CPU board is different from that of

programs installed to the C-CPU board of the FS-2575C unit, programs will be

automatically loaded from the T-CPU into the C-CPU.

1) Make system settings as listed in the table below.

Setting Item

MMSI setting (Must)

Registration of USER CH

Entry of POSITION

Selection of RX ANT

Availability of FAX RX

Selection of DSC CLASS

RT SETUP setting

IC-350 connection setting

2) Set the "S2" DIP switch all to "OFF."

CONFIDENTIAL (internal use only)

This confidential document is used only by FURUNO authorized persons.

It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.

Set "S1" on the T-IF board to "ON," and then enter the

[MENU] -> 2.USER CH

[MENU] -> 5.SYSTEM -> 4.POSITION

[MENU] -> 5.SYSTEM -> 7.RX SETUP -> 2.ANT SELECT

[MENU] -> 5.SYSTEM -> 7.RX SETUP -> 1.FAX RX

[MENU] -> 9.SERVICE -> 2.DSC SETUP -> CLASS

[MENU] -> 9.SERVICE -> 3.RT SETUP -> All Sub-menus

[MENU] -> 9.SERVICE -> 4.TX PWR (FREQ)

[MENU] -> 9.SERVICE -> 7.OTHER -> ALARM UNIT

6.10 Replacement of Boards

Fs-2575 Fs-5075