Editing Dsc Message Registered [Enter]: Detail; Reflecting Selected Message File On Dsc Compose Message Window [Dsc Msg]: Compose - Furuno FS-1575 Service Manual

4. Editing DSC message registered
Procedure)
1. Select a message file to be edited on the "MESSAGE FILE" window.
2. Press the [ENTER] knob. The "MESSAGE FILE ENTRY" window will appear.
3. Make a change to the content of registration following the procedure for "1.
Registering a DSC message," put the cursor on <REGISTER>, and then press the
[ENTER] knob. A message saying "Overwrite this address. Are you sure?" will
appear.
4. Click "Yes," and then press the [ENTER] knob.
The content of the address selected will be replaced with that edited.
5. Reflecting selected message file on DSC COMPOSE MESSAGE window
On the "MESSAGE FILE" window, select a message file to be reflected in a
transmission DSC message.
Press the [DSC MSG]: COMPOSE key. The window will be switched to the
"COMPOSE MESSAGE" window to reflect the address selected in the COMPOSE
MESSAGE.
To transmit this message, click on "GO TO CALL," and then press the [ENTER] knob.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
[ENTER]: DETAIL
[DSC MSG]: COMPOSE
4-36
4.4 DSC