4.3.7 [7. RX SETUP]
This Submenu-1 is used to make setting of Submenu-2 related to reception, including
FAX RX, ANT SELECT, and CLARIFIER.
1. FAX RX (DISABLE, ENABLE)
Set this Submenu-2 to "ENABLE" in order to connect to the external input terminal of a
weather FAX receiver. Setting it to "ENABLE" will add "FAX" on the MODE
SELECTION window.
Reference)
The FAX Reception Signal: 1900 Hz ± 400 Hz is outputted to "#10 - 11: LINE OUT"
of the [REMOTE] terminal.
The level adjustment of this signal is made by selecting [MENU] -> 9.SERVICE -> 3.
RT SETUP -> 1.SETUP -> "LINE OUT." The adjustment range is 0 dBm ± 10 dBm/
600Ω.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
4-21
4.3 SYSTEM