Checking Detailed Software Version - Furuno FS-1575 Service Manual

4) The Tone Test window will appear. Select characters to be transmitted from "1:
Tone Test 1(All Char)," "2: Tone Test 2 (Fox)," or "2: Tone Test 2 (Fox)," and then
press the [Enter] key.
• 1: Tone Test 1 (All Char): Selecting this mode with the line connected generates
• 2: Tone Test 2 (Fox):
• 3: Tone Test 3 (Beta):

2. Checking detailed software version

For details, refer to information on page 8-13.
Procedure)
1) Select "Selftest" from the [F6]: System Menu, and then press the [Enter] key.
2) "Selftest" will be executed and the results will be displayed.
3) Hold down the [Alt] and [Fn] keys and press the [F1] key. Detailed version will be
displayed.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
all characters with the FS-xx75 system and transmits
these characters.
"ABC-- YZ123---890-?().,'=/+ABCD----UVW"
Selecting this mode with the line connected generates
the following characters with the FS-xx75 system and
transmits these characters; QBF.
"THE QUICK BROWN FOX ----- 7890"
Selecting this mode with the line connected generates
a beta signal (line control signal) with the FS-xx75
system and transmits these characters.
4-105
4.14 IB-583 Setting