Side Tone]; Side Tone Lv]; Alarm - Furuno FS-1575 Service Manual

4.5.5 [5. SIDE TONE]

This submenu is used to make setting of side-tone frequency for CW.
The side-tone frequency can be set in steps of 10 Hz in the range of 400 Hz to 1000 Hz.
Side-tone is outputted to the internal and external speakers.
The submenu [5.SIDE TONE] will appear when selecting [MENU] -> 9.SERVICE -> 3.
RT SETUP -> 1.SETUP -> "CW," and then setting "CW" to "ENABLE."
Reference)
Connect a telegraph key between #11 and #12 of TB7 on the T-IF board.

4.5.6 [6. SIDE TONE LV]

This submenu is used to make setting of side-tone frequency level for CW reception in
the range of 0 to 63.
The submenu [6.SIDE TONE LV] will appear when selecting [MENU] -> 9.SERVICE
-> 3.RT SETUP -> 1.SETUP -> "CW," and then setting "CW" to "ENABLE."

4.6 ALARM

For details, refer to information on page 6-20.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
4-48
4.5 AUDIO
KEY: Connect to
between #11-12 of TB7.