6.5 SERVICE: TEST
Step-3) C-CPU PCB (3/4) Window
Pressing the [ENTER] knob will switch the display to the (3/4) window and conduct
key tests.
9. ENCODER KNOB
Turning the [ENTER] knob will change the loop from "0" to "65535" in steps of "1".
10. VOLUME KNOB
Turning the volume dial will change the volume from "0" to "510//520." An analog
voltage value from the volume knob is converted into a digital value.
11. RF GAIN KNOB
Turning the RF gain knob will change the gain from "0" to "40" in steps of "1."
12. HOOK
This test menu is used to detect whether the handset is put on or off the hook. ON- or
OFF-hook is detected with a magnet built in the handset hanger and a magnet switch
built in the handset.
13. PTT
This test menu is used to detect whether the handset PTT key is set to ON or OFF.
14. KEY mark
Pressing the KEY will turn the key display in question from black to blue.
6-35
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.