Dsc/Dse Sentence (On, Off) - Furuno FS-1575 Service Manual

15) Display of operation guide (user option)
• MF, MF/HF mode:
Displays an operation guide on the DSC message transmission and standby
window.
• NON-GMDSS mode:
Not display the "operation guide" shown above.

5. DSC/DSE SENTENCE (ON, OFF)

This Submenu-2 is used to output DSC/DSE sentences when receiving every DSC
message.
For example, the sentences are outputted in order to display Distress alert messages on
the equipment connected.
The sentences are outputted to "TB6 #1(TD-A) - #2(TD-B)" (IEC61162-1 Port) on the
T-IF board of the FS-xx75T system. The talker name is "CT."
• DSC : Digital Selective Calling Information (Received DSC message)
• DSE : Expanded Digital Selective Calling
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
MF, MF/HF: Operation guide display area
(Expanded DSC message)
4-59
4.7 SERVICE
IEC61162-1 port:
Betwseen TB6 #1-2