Chapter 1. Overview; Overview - Furuno FS-1575 Service Manual

1.1 Overview

The FS-xx75 Series is equipment integrated with a MF/HF transceiver unit that allows
SSB, CW, and TLX communications, DSC function, DSC watch receiver function, and
NBDP function. The RF output power is 150 W for FS-1575, 250 W for FS-2575, and
500 W for FS-5075.
The FS-5075 is available for full-duplex communication. To perform full-duplex
communication, the FS-5075 should have an Rx antenna connected to and a DUP-FIL
board (option) incorporated in it.
The FS-xx75 Series is available for connection of two controller units. It is designed to
give the priority for communication operation to the controller unit connected to the
"CONTROLLER-1" port side.
The NBDP terminal should be connected to No. 1 controller unit. Connecting it to No. 2
controller unit disables the equipment to perform communications.
The FS-xx75 Series complies with the rules and regulations, including
IMO A.806 (19), IMO A.694 (17), MSC 36 (63), MSC 68 (68), IEC 61162-1Ed.4,
IEC 60945 Ed.4, ETS 300 067 Ed.1, EN 300 338, EN 300 373-1, EN 301 033,
ITU-R M.476-5, ITU-R M.490, ITU-R M.491-1, ITU-R M.492-6, ITU-R M.493-13,
ITU-R M.541-9, ITU-R M.625-3, ITU-R M.821-1, ITU-R M.1082-1, ITU-R M.1173,
and MSC/Circ. 862
Transceiver Unit
Controller Unit
Antenna Coupler
NBDP Terminal
Full-Duplex operation
RF Output Power
AC/DC Power Supply
Software
Built-in WR1 Kit
Built-in WR2 Kit
CW Communication
RX Antenna
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Table 1.1.1 Overview of Equipment Specifications
FS-1575
FS-2575
FS-1575T FS-2575T
FS-2575C (Common to all models)
AT-1575 AES
AT-5075
AT-1575 SUS
IB-583 and IB-585 (Common to all models)
No No
150 W 250 W
PR-300 PR-850A
Common
Standard
Option
Allowed
RX-only antenna or shared use of T/R antenna
1-1

Chapter 1. Overview

FS-5075
FS-5075T
AT-5075
Yes
(DUP board is
required)
500 W
PR-850A