6. Ensuring antenna connection
A tension value of the lead-in wire can be determined by considering its flexure due to
the swinging of the Antenna. Too strong tension may cause breaking at the connection
base of the lead-in wire, while too weak tension may cause a touch between the lead-in
wire and other structures.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Do not use any insulator.
Breaking the connection of lead-in
wire may cause burning-out of the
Antenna coupler or RT breakdown.
6-58
6.9 Checking Antenna Coupler