Rt Setup]; Tx Freq (All Free, Free, Marine/User, Itu/User, User) - Furuno FS-1575 Service Manual

4.7.3 [3. RT SETUP]

1. TX FREQ (ALL FREE, FREE, MARINE/USER, ITU/USER, USER)

This Submenu-3 is used to make setting of applicable transmission frequency.
Reception frequency can be set to any frequency in the range of 100.0 kHz to 29,999.9
kHz regardless of the setting of this Submenu.
Reference)
1) The reception frequency range is from 100.0 kHz to 29,999.9 kHz regardless of
the setting of the Submenu-3 "TX FREQ."
2) Setting this Submenu-3 to "ITU/USER" or "USER" will not allow for the
selection of [MENU] -> 5.SYSTEM -> 2.KEY ASSIGN -> "TRX FREQ." If
KEY ASSIGN is registered, it will be deleted.
Operation
Setting (1.605 MHz to 27.5 MHz)
ALL FREE
FREE
(Except limit frequency)
MARINE/USER
ITU/USER
USER
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Table 4.7.2 Transmittable Frequency Range
Frequency
Marine Band
Yes
Yes
No
No
No
4-61
ITU CH
Yes Yes
Yes Yes
Yes Yes
No Yes
No No
4.7 SERVICE
User CH
Yes
Yes
Yes
Yes
Yes