Overview Of Rt Window; Overview Of Scan Window - Furuno FS-1575 Service Manual

4. Overview of RT Window

Mode: SSB, TLX, AM,
LSB, and CW are
subject to setting.
POWER:
FS-1575/2575: Hi, MID, LOW
FS-5075: Hi, MID, LOW1, LOW2

5. Overview of SCAN Window

DISTRESS:
Registers with
DISTRESS SCAN.
ROUTINE:
Registers with
ROUTINE SCAN.
- DISTRESS SCAN
- ROUTINE SCAN
- MONITOR
- DISTRESS SCAN Stop : [MENU] -> 9. SERVICE -> 5. TEST -> 4. TA TEST
- ROUTINE SCAN Stop : [SCAN ]
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
ITU CH: xxx
USER CH: 0xxx
AGC：
OFF, FAST, SLOW
SIMP
S-DUP
DUP (FS-5075 only)
ATT: -10dB
(RF AMP passed)
: [MENU] -> 6. DSC -> 6. DISTRESS SCAN
: [MENU] -> 6. DSC -> 5. ROUTINE SCAN
: 652111 -> Select DISTRESS/ROUTINE
1-13
Voice signal processing
Function
Registers with KEY ASSIGN
Pos & Pos Source:
EPFS/MANUAL
EPFS(OLDER): No data for
EPFS(OFFLINE): No data
S-Meter
IA: ATU
IC: PA IC
VC: PA VC
RF: TX FIL OUT (Vf)
VS: 24V
- WR2: Indicates reception
- RX: Indicates reception
with the RX board.
-> DISTRESS SCAN
1.3 Operations
4 hours
for 10 min.
with the WR2 board.