5.7 Board Adjustment
5.7.4 TX FIL Board Adjustment
• 05P0870A: FS-5075
• 05P0870B: FS-2575
• 05P0876: FS-1575
Make adjustment of the "R43" ALC variable resistor so that the output power of the
FS-xx75 will come to the rated output power.
After completion of the ALC adjustment, ensure the TX GAIN adjustment.
For details, refer to "2. TX GAIN adjustment" in "5.7.3 TX Board Adjustment" on page
5-46.
R43: ALC
Fig. 5.7.21 TX FIL Board (05P0870A, B): FS-2575 and FS-5075
R43: ALC
Fig. 5.7.22 TX FIL Board (05P0876): FS-1575
5-50
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.