Overview Of Display; Status Area - Furuno FS-1575 Service Manual

1.3.2 Overview of Display

1. Status Area

The status area is located at the top of the screen and mainly used to display icons. The
RT window displays MMSI, while the DSC window and the Menu window display
radio communication frequencies.
Icon Function
Appears when the speaker is set to "ON "(not on mute).
Appears when the speaker is set to "OFF" (on mute).
Appears when there are one or more unread logs.
Appears when ACK transmission is set to "ABLE."
Appears when a hardware error occurs and disappears when the error is
eliminated.
Appears when the system entry into the maintenance mode.
To set the system to service menu, press the [MENU] key, and then press the
[TAB] key five consecutive times to put the system into maintenance mode.
Subsequently, click on "SERVICE" on the MENU window, and then enter a
password.
Indicates that the screen is updated at regular intervals of time.
MMSI Displays registered MMSI.
Appears when communication with the NBDP terminal is established.
On the DSC window and the MENU window, appears when the emission type
is set to "SSB" .
On the DSC window and the MENU window, appears when the emission type
is set to "TLX".
On the DSC window and the MENU window, appears when the emission type
is set to "FAX".
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Fig. 1.3.1 Display of Controller unit
1-10
Table 1.3.1 List of Status Icon Displays
1.3 Operations
Status Area
Information
Display Area
Tab/Guide Area