Making Brightness Setting; Removing Sd Card - Furuno FS-1575 Service Manual

Import Settings: All Settings, System Settings, Station Lists, ID Settings
Used to incorporate set values saved in the SD card by executing "Export." Select
data to be imported to incorporate the set values in the IB-585.
Import Settings
All Settings
System Settings
Station Lists
ID Settings
Error Count
Used to select whether or not to display "Error Count" on the Communication
window.

4.15.7 Making Brightness Setting

Holding down the [Alt] key and pressing the [F6] key will reduce the brightness on a
scale of 1 to 11. To raise brightness, press the [F7] key.
When turning ON the power supply again, the brightness will return to the preset level.
To make presetting, select [F6] -> Window Color -> Brightness. To make brightness
setting, hold down the [Alt] key and press the [F6] and [F7] keys or [->] and [<-] keys.

4.15.8 Removing SD Card

To safely remove the SD card, follow the procedure specified below.
Procedure)
1) Select "A: Remove SD card" from the [F1] Menu, and then press the [Enter] key.
2) Click "Yes," and then press the [Enter].
Note)
Unless the SD card is removed and inserted once after the completion of the
procedure shown above, no write and read to and from the SD card are allowed.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Export Settings
All Settings
System Settings
Station Lists
ID Settings
4-116
4.15 IB-585 Setting